Surface Cleaner

The best high-pressure washer is an accessory you add to the high-pressure washer. The surface cleaner has 2 or 3 nozzles connected to the end of the rotating arm, which can cover an area of 8 inches to 30 inches when the rotating arm runs. During the cleaning process, you can push the handle of the surface cleaner to the position you want to clean. Like the water broom, the nozzle is kept at a uniform height during the cleaning process, and no zebra pattern is left. The BISON rotary surface cleaner is equipped with a sturdy brush, which has a long service life and is easy to slide control.

If you want to wholesale high-pressure washer, useing BISON pressure washer accessories to wash the floor will significantly improve the cleaning effect. The surface cleaner can better complete the cleaning work on a flat floor, especially decks, terraces, sidewalks, driveways, pool decks, parking lots. The design of every surface cleaner of BISON is for better cleaning.

The benefits of surface cleaner

Using a high-pressure surface cleaner to wash the floor may bring you many benefits. The most important are the following:

• Faster cleaning

When you try to clean surfaces such as bricks and concrete with regular nozzles, you may not get all the coverage you want to clean.The surface cleaner can provide you with tens of inches of coverage, allowing you to clean everything faster.

• Better cleaning effect

When you use a conventional high-pressure cleaner nozzle to clean the floor, you keep moving the gun to cover the cleaning area, which is likely to leave streaks or uncleaned areas. The surface cleaner can not only cover a wider area, but its rotating action can also prevent any streaks and keep the cleaned surface consistent.

• 3. Reduce the risk of damage

If the pressure washer is primarily used to clean surfaces such as wooden decks, a surface cleaner can be used as a protective measure.

Some have a small detergent drawer where you can add pressure washer detergent. However, you may want to use mild cleaners as they can protect the fittings and finish. In most cases, no surface cleaner is even needed as the water pressure is sufficient for cleaning.

Technically, surface cleaners are used to clean floors. Still, if you plan to use it on a flat surface, there's no reason not to.

Most semi-professional and consumer-grade pressure washers are relatively maintenance-free. Just make sure they are clean after each use. Professional models with grease nipples also need to be cleaned, but the bearings must be lubricated every 10 to 12 hours.

As long as the selected product is compatible with the machine, surface cleaners should not interfere with the cleaning ability of a pressure washer.