MON - FRI 8AM - 5PM
(86) 136 2576 7514
|Minimal order||20 pieces|
|Payments||L/C, T/T, O/A, D/A, D/P|
|Delivery||Within 15 days|
This 93.5cc industrial gasoline engine is a universal alternative to the 3 HP engine.
3HP gasoline engine 156F has a durable cast iron cylinder that can withstand wear and abuse. Overhead valve (OHV) design provides higher fuel efficiency, quieter operation, and longer service life. The horizontal shaft design makes it an ideal general-purpose alternative to gas engines.
3HP gasoline engine has many kinds of usage, such as a cultivator, water pump, generator, replacement engine, snow blower and etc.
Good Mufflers and Less Fuel Consumption
The non-contact transistorized ignition(C.T.I) System makes sure to start easily and quickly
Engine mounted to this Genset
Air-cooled, 4-stroke engine, advanced OHV, delivers non-fluctuating power for a long time
Light and compact design
Low fuel consumption
Easy and fast starting and installing
Lower noise and small vibration
|Engine Type||4-stroke, single-cylinder, air-cooled, OHV|
|Ignition System||Non-contact transistorized ignition(T.C.I)|
|Starting System||Recoil starting|
|Engine oil capacity||0.6L|
|Fuel tank capacity||1.6L|
BISON recommends changing the oil after 100 hours of operation or every 6 months, whichever comes first. BISON also recommends the use of 4-stroke engine oil or equivalent high-cleanliness, high-quality engine oil.
4 steps to replace BISON 156 engine oil
Remove the filler cap and drain plug to drain the oil.
Reinstall and tighten the drain plug.
Refill with recommended engine oil and check the oil level.
Reinstall the fuel filler cap.
Do not use non-clean oil or other oils that are not recommended
Please make sure that the engine is turned off and drain the oil when the engine is still warm (so that the oil can be drained more thoroughly).
Check the engine oil level on a horizontal surface
After changing the oil, wash your hands thoroughly with soap and water